Description
Made in titanium, it adds sportiness, lightness and strength to the type-approved standard silencer, making its design even more attractive.
FITS ON
DIAVEL V4
These Rizoma adapters make possible to mount Rizoma "SGUARDO" bar end turn signals (FR060), in combination with Rizoma handlebar mirrors (SPY-ARM, CLASS RETRO,REVERSE RETRO (BS300/BS303/BS070/BS144).
This adapter will fit into the handlebar opening, allowing the Rizoma mirror to clamp down onto this adapter, while leaving a hollow center for the "SGUARDO" turn signal wiring to pass through. Please measure the inner diameter of your handlebars to determine which size you need.
Note: Sold individually
Note: Fits into handlebars with an internal diameter of 13.5mm to 18mm. (Typically standard 7/8" bars)
Reduce your lever effort with CNC Racing's clutch slave cylinder for your Ducati.
CNC machined from light billet alloy and then given a colored anodized surface finish and a beautiful "race-style" look.
Featuring improved hydraulic seals to prevent leaks and increase durability, available in your choice of 3 beautiful anodized finish combinations!
Original piston size is 22mm in diameter, resulting in fatigued hands and forearm pump. CNC Racing's larger diameter clutch slaves reduce lever effort by over 25%, and the bigger the piston, the easier the lever pull.
The only drawback to a larger clutch slave is you do technically have to pull the lever in slightly further to engage the clutch to the same extent as with a smaller piston
DUCATI
DIAVEL V4
2023 - 2023
DUCATI
MULTISTRADA V4
2021 - 2022
DUCATI
MULTISTRADA V4 PIKES PEAK
2022 - 2023
DUCATI
MULTISTRADA V4 RALLY
2023 - 2023
DUCATI
MULTISTRADA V4 S
2021 - 2023
DUCATI
MULTISTRADA V4 S SPORT
2021 - 2022
DUCATI
PANIGALE V4
2018 - 2023
DUCATI
PANIGALE V4 R
2019 - 2021
DUCATI
PANIGALE V4 R
2023 - 2023
DUCATI
PANIGALE V4 S
2018 - 2023
DUCATI
PANIGALE V4 SP
2021 - 2023
DUCATI
STREETFIGHTER V4
2020 - 2023
DUCATI
STREETFIGHTER V4 LAMBORGHINI
2023 - 2023
DUCATI
STREETFIGHTER V4 S
2020 - 2023
DUCATI
STREETFIGHTER V4 SP
2022 - 2023
DUCATI
SUPERLEGGERA V4
2020 - 2021
CNC Racing 's engineers have developed Ducati's Clutch Slave Cylinders replacements.
The Clutch Slave Cylinders manufactured in Italy by CNC Racing are machined from a solid block of aluminum using CNC technology .
The 29mm diameter CNC Racing Clutch Slave Cylinder will change the feeling with your clutch lever , it will be softer, and is also a Precious and Racing part to add to your twin-cylinder , available in anodized colors Red , Black, Gold , Titanium and Magnesium .
The installation is very simple and is explained in the pdf file downloaded from this page.
To maximize the results also suggest a Radial Clutch , find it on this page to related products.
Please note: this part works only with DOT4 Brake Fluid.
DUCATI
DIAVEL V4
2023 - 2023
DUCATI
MULTISTRADA V4
2021 - 2022
DUCATI
MULTISTRADA V4 PIKES PEAK
2022 - 2023
DUCATI
MULTISTRADA V4 RALLY
2023 - 2023
DUCATI
MULTISTRADA V4 S
2021 - 2023
DUCATI
MULTISTRADA V4 S SPORT
2021 - 2022
DUCATI
PANIGALE V4
2018 - 2023
DUCATI
PANIGALE V4 R
2019 - 2021
DUCATI
PANIGALE V4 R
2023 - 2023
DUCATI
PANIGALE V4 S
2018 - 2023
DUCATI
PANIGALE V4 SP
2021 - 2023
DUCATI
STREETFIGHTER V4
2020 - 2023
DUCATI
STREETFIGHTER V4 LAMBORGHINI
2023 - 2023
DUCATI
STREETFIGHTER V4 S
2020 - 2023
DUCATI
STREETFIGHTER V4 SP
2022 - 2023
DUCATI
SUPERLEGGERA V4
2020 - 2021
Our new Hybrid One Armed features a removable handle which allows you to use the stand with the handle going either forward or toward the rear of the bike. The handle can be installed going either to the front or back on the drive side, but only to the rear on the non-drive side of most motorcycles. When installed on the drive side, it allows wheel removal; when installed on the non-drive side, it allows easy sprocket removal. It offers great leverage and stability and the ball bearing head makes it easy to spin the wheel for chain oiling.Sold complete, but pins are interchangeable to fit other bikes. Fits Ducati 1098, 1198, 1199, 1299, Panigale V2, Diavel, xDiavel, Multistrada 1200, Monster 1200, Streetfighter 1098/1198, or '17+ Ducati SuperSport. Will fit Ducati Panigale V4 but will not lift it high enough for use of tire warmers at this time. Not a good fit on the Multistrada 1260 due to tire profile height If your 1098 is one of the first 2007 models to arrive from Italy, you will want to order F0099-211 which features the correct pin(slightly larger) for that first shipment of 1098's that came from Italy in '07 model year. NOTE: Does not fit Ducati 998, 996, 916, 848, 748, Monster 796, 848 Streetfighter, HyperMotard, Monster 1100, Monster S4R, Monster S2R, Multistrada 1000, M900E, Multistrada 1260, or Diavel(right side). Pirelli Tire Note: Pirelli Diablo Superbike (SC1-V3) Rear 200/65-ZR17 will be too tall to use this stand. See our Elite One Armed Rear Stand if you...
This billet aluminum rear wheel axle nut is a very simple upgrade that adds a custom color touch to your bike. This Ducabike axle nut is a great option because it has the "cone" built in. No longer needing the 2 piece setup. This axle nut is a great all in one solution, making for easier removal and replacement. Note: Rear axle nuts are typically a slightly darker or duller color than normal, due to the special hard anodized coating that is required to stand up the the heavy torque settings of a rear axle tool. Note: This is the nut for the "open wheel" side. Make/Model/Year Ducati / 1098 / 2007, Ducati / 1098 / 2008, Ducati / 1098 R / 2007, Ducati / 1098 R / 2008, Ducati / 1098 R / 2009, Ducati / 1098 S / 2007, Ducati / 1098 S / 2008, Ducati / 1098 S / 2009, Ducati / 1198 / 2009, Ducati / 1198 / 2010, Ducati / 1198 / 2011, Ducati / 1198 / 2012, Ducati / 1198 / 2013, Ducati / 1198 S / 2009, Ducati / 1198 S / 2010, Ducati / 1198 S / 2012, Ducati / 1198 S / 2011, Ducati / 1198 S / 2013, Ducati / Streetfighter 1098 / 2009, Ducati / Streetfighter 1098 / 2010, Ducati / Streetfighter 1098 / 2011, Ducati / Streetfighter 1098 / 2012, Ducati / Streetfighter 1098 / 2013, Ducati / Streetfighter 1098 S / 2009, Ducati / Streetfighter 1098 S / 2010,...
Accessory made of carbon, being perfect for adding a touch of sportiness to the bike look. A detail that will not go unnoticed.
FITS ON
DIAVEL V4
COMPATIBILITY
NOT COMPATIBLE WITH [P/N]:
97181111AA SPORT HEADLIGHT FAIRING.97181121AA TOURING WINDSHIELD KIT
Its high quality materials and the carbon fibre unique finish create a wonderful detail, designed to embellish the front of the tank and give the bike an additional touch of character.
FITS ON
DIAVEL V4
Magnesium alloy accessory required for the installation of the dry clutch in non-preset vehicles. It includes everything necessary for the installation of this clutch. A real must-have for the most demanding Ducatistas.NOTES:Accessory to be fitted in conjunction with dry clutch.
FITS ON
DIAVEL V4
Protects against high temperatures while maintaining the racing look.
FITS ON
DIAVEL V4
COMPATIBILITY
NOT COMPATIBLE WITH [P/N]:
96482171AA RACING EXHAUST KIT 170596482172AA RACING EXHAUST.96482211AA SILENCER COVER FOR TYPE-APPROVED EXHAUST
An accessory designed to offer lightness and excellent protection to the rear of the Diavel V4. In addition to guaranteeing excellent technical characteristics, the carbon fibre, combined with the sleek design of this accessory, also lends an additional bold and stylish touch to the refined aesthetics of the bike.
FITS ON
DIAVEL V4
Ultra-modern design accessory, skilfully finished. The forging process gives lightness and agility to its sculptural and muscular shapes. Standard measurements: 3.50"x17"/8.00"x17".
FITS ONDIAVEL V4
"Premium" rider seat.
Made of genuine leather and embellished with precious finishes, it gives the bike a customised and elegant look. A classy accessory for true connoisseurs.
Supported BikesDIAVELDIAVEL V42023
Exclusive mat, ideal for workshops, garages and racing pits, boasting the unmistakable classic Ducati Corse colour scheme. The upper layer, made of 100% polyamide felt material, is exceptionally compact and hard-wearing and absorbs and retains any spills. The lower layer, made of waterproof PVC rubber, also features a trip-proof trim to ensure maximum safety. The scrupulous selection and combination of these oil and fuel-proof materials make them hard-wearing, and a superior quality product ideal for parking your bike in a garage or in the paddock. The digitally printed graphics remain flush with the surface of the mat and do not alter the absorbency and soft touch features of the material. The perfect accessory to give your garage or paddock that extra professional touch that won’t go unnoticed. Complies with FIM ENVIRONMENTAL 4.1 and FMI: Art.47 standards